Return to search

Novel Approach for Computational Modeling of a Non-Premixed Rotating Detonation Engine

Detonation cycles are identified as an efficient alternative to the Brayton cycles used in power and propulsion applications. Rotating Detonation Engine (RDE) operating on a detonation cycle works by compressing the working fluid across a detonation wave, thereby reducing the number of compressor stages required in the thermodynamic cycle. Numerical analyses of RDEs are flexible in understanding the flow field within the RDE, however, three-dimensional analyses are expensive due to the differences in time-scale required to resolve the combustion process and flow-field. The alternate two-dimensional analyses are generally modeled with perfectly premixed fuel injection and do not capture the effects of improper mixing arising due to discrete injection of fuel and oxidizer into the chamber. To model realistic injection in a 2-D analysis, the current work uses an approach in which, a Probability Density Function (PDF) of the fuel mass fraction at the chamber inlet is extracted from a 3-D, cold-flow simulation and is used as an inlet boundary condition for fuel mass fraction in the 2-D analysis. The 2-D simulation requires only 0.4% of the CPU hours for one revolution of the detonation compared to an equivalent 3-D simulation. Using this method, a perfectly premixed RDE is comparing with a non-premixed case. The performance is found to vary between the two cases. The mean detonation velocities, time-averaged static pressure profiles are found to be similar between the two cases, while the local detonation velocities and peak pressure values vary in the non-premixed case due to local pockets fuel rich/lean mixtures. The mean detonation cell sizes are similar, but the distribution in the non-premixed case is closer due to stronger shock structures. An analytical method is used to check the effects of fuel-product stratification and heat loss from the RDE and these effects adversely affect the local detonation velocity. Overall, this method of modeling captures the complex physics in an RDE with the advantage of reduced computational cost and therefore can be used for design and diagnostic purposes. / Master of Science / The conventional Brayton cycle used in power and propulsion applications is highly optimized, at cycle and component levels. In pursuit of higher thermodynamic efficiency, detonation cycles are identified as an efficient alternative and gained increased attention in the scientific community. In a Rotating Detonation Engine (RDE), which is based on the detonation cycle, the compression of gases occurs across a shock wave. This method of achieving high compression ratios reduces the number of compressor stages required for operation. In an RDE (where combustion occurs between two coaxial cylinders), the fuel and oxidizer are injected axially into the combustion chamber where the detonation is initiated. The resultant detonation wave spins continuously in the azimuthal direction, consuming fresh fuel mixture. The combustion products expand and exhaust axially providing thrust/mechanical energy when coupled with a turbine.

Numerical analyses of RDEs are flexible over experimental analysis, in terms of understanding the flow physics and the physical/chemical processes occurring within the engine. However, three-dimensional numerical analyses are computationally expansive, and therefore demanding an equivalent, efficient two-dimensional analysis. In most RDEs, fuel and oxidizer are injected from separate plenums into the chamber. This type of injection leads to inhomogeneity of the fuel-air mixture within the RDE which adversely affects the performance of the engine. The current study uses a novel method to effectively capture these physics in a 2-D numerical analysis. Furthermore, the performance of the combustor is compared between perfectly premixed injection and discrete, non-premixed injection. The method used in this work can be used for any injector design and is a powerful/efficient way to numerically analyze a Rotating Detonation Engine.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/101777
Date17 July 2019
CreatorsSubramanian, Sathyanarayanan
ContributorsMechanical Engineering, Meadows, Joseph, Massa, Luca, Bairaktarova, Diana, Tafti, Danesh K.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
FormatETD, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0024 seconds