This diploma thesis focuses on computational modeling of the cell mechanical tests. The goal of this thesis is to build a cell model and to simulate compression test on this model. If necessary, the model should be adjusted so the model reflects real cell behavior. It was created the cell model reflecting cytoplasm, nucleus, membrane and cell cytoskeleton. Cytoskeleton was modeled as tensegrity structure. After this, the pressure test was simulated on this model. The behavior of the cell model and real cell was compared using the stress force. The stress force - cell deformation curve was markedly different for the cell model and the real cell. For this reason, the cytoplasm material model was adjusted. The difference between the curves was acceptable after this modification. It was found during computations that the cytoskeleton model influence on the cell load is minimal. These results does not reflects real cell behavior, which means that the model is considered inadequate for performing stress load simulation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229369 |
| Date | January 2010 |
| Creators | Krbálek, Jaroslav |
| Contributors | Fuis, Vladimír, Burša, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds