This dissertation presents a thesis on the use of additive manufacturing in the development and evaluation of a computer-assisted system for wrist-fracture repair. The work developed tools for performing navigated wrist surgery, developed methods for evaluating surgical performance, and provided novel experience with model-based
surgical evaluation.
Patient-derived bone models, fabricated using additive manufacturing, were proposed as an alternative to cadaver specimens for testing and validating the new surgical system. The accuracy of fabricating these models from computed-tomography imaging was investigated using laser scanning and was found to be reproducible to within half a millimeter.
Three generations of a surgical system for navigated wrist-fracture repair were
developed and evaluated using a wrist model that was produced by additive manufacturing. Compared to cadaver specimens, the model was less expensive and performed equally well under simulated surgical conditions. The model-based evaluation permitted larger study sizes that increased the statistical power of the experimental results.
Criteria for surgical performance included surgical and technical measurement of
screw placement. The navigation system was superior in optimizing screw placement compared to conventional surgical methods. Navigation also reduced the risk of
radiation exposure and clinical complications of wrist-fracture repair.
Surgical tools, including a drill guide and wrist-stabilization device were developed
with the use of additive manufacturing. Prototype devices could be quickly and
economically fabricated for testing under realistic conditions.
A system for performing navigated wrist fracture repair was successfully developed
through the use of additive-manufacturing prototyping and evaluation. Additive manufacturing was integral to the successful evaluation of the system's improvement in performance. / Thesis (Ph.D, Mechanical and Materials Engineering) -- Queen's University, 2012-12-19 11:40:46.269
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/7744 |
Date | 14 January 2013 |
Creators | Smith, Erin Janine |
Contributors | Queen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.)) |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English, English |
Detected Language | English |
Type | Thesis |
Rights | This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner. |
Relation | Canadian theses |
Page generated in 0.0012 seconds