The development of CAPP (Computer Aided Process Planning) systems promises improvement to the design efficiency and quality of process plans, whilst maintaining knowledge for future developments. Although considerable progress has been made in Computer Aided Process Planning, most of the systems developed or under development so far are limited to one manufacturing operation and to planning for an individual part design. The systems lack an overall structure for real manufacturing practice. This thesis examines the problems involved in the planning of an extensive manufacturing task involving many different processes including chemical and thermal treatments. On the basis of the evaluation of the manufacturing system in the collaborating company, an intelligent database system has been designed to solve metallurgical process planning problems involved in the manufacture of large steel forgings. In this CAPP database system, two hierarchy control levels involving a number of local planning areas have been adopted to allow the development of process sub-plans as well as supporting engineering data. All the process sub-plans have been integrated into a single system rather than isolated as separate entities within the overall metallurgical process planning system together with quality assurance control and other functions. These sub-plans, however, are planned and modified in the separate planning areas, the development being conducted on facsimile data records. Only when each sub-plan has reached a satisfactory state of development is it issued - made available to the overall system - by transferring the facsimile records into the system data files, the facsimile records then being discarded. Metallurgical process knowledge and rules have been incorporated into the database. These allow the system to assist users to make decisions and achieve final desired process plans. A versional approach has been developed to organise and control the stage by stage evolution of issued process plans within this complex steel forging environment. The use of separate planning areas and local facsimile records allows the modification of sub-plans already issued to be undertaken on a step by step but secure basis. A fully operating authorisation system controlling access to the data and the deletion or modification of records has been achieved. This is essential in a CAPP system of this type in which historical decisions, or approved rules based on historical experience, are presented to the users as the basis to make new decisions. The work has been extended to explore external enhancement of the central database system with an expert system and with specially written C ++ programmes. The system architecture needed to support this link is described, and issues raised by the enhancement that relate to the overall control are then addressed. The final part of the thesis examines the limitations of the method that has been developed and discusses difficulties involved in implementing a CAPP system in a large concern involved in the 'bespoke' manufacture of complex engineering artifacts on a one-off design basis.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:261007 |
| Date | January 1995 |
| Creators | Deng, Wenzhong |
| Publisher | Sheffield Hallam University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://shura.shu.ac.uk/19553/ |
Page generated in 0.0026 seconds