Return to search

Strengthening Of Reinforced Concrete Frames By Custom Shaped High Strength Concrete Masonry Blocks

Located on one of the highly active seismic fault systems in the world, the building stock in Turkey is mainly composed of reinforced concrete frames with 4-5 stories. Due to design and construction deficiencies resulting from the use of unqualified personnel and insufficient supervision, many of these buildings lack lateral stiffness, ductility and strength. For many structures, there is a need to alleviate these deficiencies by means of some rehabilitation techniques prior to earthquakes. One approach also used very widely in Turkey is to fill some of the frame bays by cast-in-place R/C panels. The procedure appears to be very practical at first glance. It also appears to be very economical as far as the production of the panels is concerned. However, the production phase is slow, dirty, destructive and disruptive to occupants. Moreover, it requires relatively skilled personnel and special equipment. Therefore, the real life experience shows that the actual cost in practice is much higher when all other hidden costs are taken into account.
The aim of this experimental study is to explore the potential of using infill walls made of custom shaped and high strength concrete blocks as a simpler and more practical alternative to cast-in-place R/C panels to increase the lateral load bearing capacity of frame structures. The effectiveness of FRCM (Fiber Reinforced Cementitous Matrix) system on damaged structures is also investigated in this study.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/2/12610335/index.pdf
Date01 February 2009
CreatorsArslan, Guray
ContributorsPolat, Ugur
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for METU campus

Page generated in 0.0018 seconds