The objective of this research is to determine if the deflection equations currently adopted in ACI
440.1r-15 and previously ACI 440.1r-06 accurately reflect the flexural behavior of an overreinforced
Basalt Fiber Reinforced Polymer (BFRP) concrete beam. This was accomplished with
experimental, analytical and numerical models. The experiment consisted of two beams doublyreinforced
with BFRP rebar. A three-point flexural test on beams with a 30 in. clear span was
performed and the deflections were recorded with a dial gauge and LVDT system. This data was
compared to the equations from ACI 440.1r-06, ACI 440.1r-15, Branson’s equation and a
numerical model created in ANSYS Mechanical APDL.
Experimental results show a stiffer beam than expected when compared to the four predictive
models for deflection. This can be due to the level of over-reinforcement and the small clear-span
to depth ratio. Further research should be conducted to determine the cause for the additional
stiffness. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection
Identifer | oai:union.ndltd.org:fau.edu/oai:fau.digital.flvc.org:fau_38060 |
Contributors | Trotsek, Dylan (author), Arockiasamy, Madasamy (Thesis advisor), Florida Atlantic University (Degree grantor), College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering |
Publisher | Florida Atlantic University |
Source Sets | Florida Atlantic University |
Language | English |
Detected Language | English |
Type | Electronic Thesis or Dissertation, Text |
Format | 110 p., application/pdf |
Rights | Copyright © is held by the author, with permission granted to Florida Atlantic University to digitize, archive and distribute this item for non-profit research and educational purposes. Any reuse of this item in excess of fair use or other copyright exemptions requires permission of the copyright holder., http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0013 seconds