This is partly because the requirements for such an ultimate material change with people’s perception about its properties as well as its environmental impact. Thus, the once-believed ultimate Portland cement binder is now becoming unacceptable for a number of reasons including poor durability as well as severe environmental impact during production. Thus, an improved mineral binder is required by modern society to serve the same purposes as the existing Portland cement binder, as well as to reduce the current environmental impact caused by Portland cement production. / Geopolymerisation is such a ‘green’ technology capable of turning both natural ‘virginal’ aluminosilicates and industrial aluminosilicate wastes, such as fly ash and blast furnace slag, into mechanically strong and chemically durable construction materials. However, the source materials for geopolymer synthesis are less reactive than Portland cement clinkers and the chemical compositions of these source materials can vary significantly. Consequently, product quality control is a major engineering challenge for the commercialisation of geopolymers. / This thesis is therefore devoted to the mechanistic understanding of the interfacial chemical interactions between a number of natural and industrial aluminosilicates and the various activating solutions, which govern the reactivity of the aluminosilicate source materials. The effects of activating solution alkalinity, soluble silicate dosage and anionic contamination on the reactivity of the aluminosilicate source materials to produce geopolymeric binders, as well as their bonding properties to natural siliceous aggregates for concrete making, are examined. In particular, a new set of novel ‘realistic’ reaction models has been developed for such purposes. These reaction models have been further utilised to develop a novel analytical procedure, which is capable of studying geopolymerisation on ‘real’ geopolymers in situ and in real time. This novel procedure is invaluable for the total understanding of geopolymerisation, which is in turn vital for effective geopolymer mix designs.
Identifer | oai:union.ndltd.org:ADTP/245466 |
Date | January 2002 |
Creators | Lee, William K. |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | Terms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access |
Page generated in 0.002 seconds