Concrete-filled tubular (CFT) columns have been widely adopted in building structures owing to their superior structural performance, such as enhanced load bearing capacity, compared to hollow tubes. Circular, square and rectangular hollow sections are most commonly used in the past few decades. Elliptical hollow section (EHS) available recently is regarded as a new cross-section for the CFT columns due to its attractive appearance, optional orientation either on major axis or minor axis and improved structural efficiency. The state of the research in terms of elliptical columns, tubular joints between EHSs and connections with CFT columns, etc., are reviewed in this thesis, showing a lack of investigations on EHSs, especially on beam to elliptical column connections which are essential in framed structures. The structural behaviour of elliptical column to I-beam connections under bending is studied in this thesis to fill the research gap. Overall ten specimens with various joint assemblies were tested to failure to highlight the benefits of adopting concrete infill and stiffeners in the columns. A three-dimensional finite element model developed by using ABAQUS software is presented and verified against obtained experimental results, which shows acceptable accuracy and reliability in predicting failure modes of the connections and their moment capacities. Parametric studies were performed to access the main parameters that affecting the bending behaviour of the connections. A simple hand calculation method in terms of ultimate moment capacity is proposed according to experiments conducted for connections with concrete-filled columns.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:742747 |
| Date | January 2017 |
| Creators | Yang, Jie |
| Publisher | University of Bradford |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/10454/16022 |
Page generated in 0.0015 seconds