In this work is discussed about material Lignamon, which has been industrially produced in the former Czechoslovakia since the 1970s. The production of this material, mainly from beechwood, combines plasticization with gaseous ammonia, densification of material by hydraulic press and heat stabilization at 180 ° C. The aim of this work is to determine the effect of these processes on the resulting resistance to wood-decaying fungi. Lignamon has a very high resistance to wood-decaying fungi and is classified as very durable according to EN 350 - 1. For each phase of the Lignamon process, samples were produced to best illustrate the changes that take place during the given phase in the wood. In particular, sample sets treated with ammonia gas, densified samples, heat-treated samples, and samples on which a combination of ammonia gas impregnation and thermal modification were performed. The resistance to wood-decaying fungi have been tested according to EN 113, including a set of Lignamon samples. The results of this test were statistically evaluated and it was found that ammonia treatment has the greatest influence on the durability of Lignamon, as well as the heat treatment and not so significantly densification. Individually, however, none of these modifications cause wood resistance to wood-decaying fungi as their combination in the production process of Lignamon.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:428084 |
| Date | January 2018 |
| Creators | Nevrlý, Ondřej |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds