Return to search

Measurements of exciton diffusion in conjugated polymers

The exciton diffusion length, which is the distance an exciton can diffuse in its lifetime, is an important parameter that has a critical impact on the operation of many organic optoelectronic devices, including organic solar cells, light emitting diodes and lasers. Knowledge of the exciton diffusion length can be a powerful aid for the design and optimisation of these devices. This thesis details the development of techniques based on time-resolved fluorescence for measuring the exciton diffusion in organic semiconductors. Two main methods were used to investigate exciton diffusion in the conjugated polymers P3HT, MEH-PPV and F8BT: the surface quenching technique and exciton-exciton annihilation. In particular, the surface quenching technique was adapted to avoid some of the potential pitfalls that have plagued earlier measurements. Using a titania quencher, measurements were performed using the surface quenching technique and fitted with an exciton diffusion model, allowing the calculation of the exciton diffusion length. Results from measurements of the exciton-exciton annihilation rate, which is a diffusion controlled process, where in good agreement with those from surface quenching, confirming the robustness of this twofold approach. A novel method for the control of the β-phase conformation in PFO films was used to produce films containing varying concentrations of β-phase. Exciton-exciton annihilation was used to investigate exciton diffusion in these films, revealing a gradual rise with increasing β-phase fraction due to improved interconnectivity. This work demonstrates how simple processing techniques can be used to control both film morphology and the exciton diffusion. The thickness dependence of the photoluminescence lifetime in conjugated polymers is a phenomenon that has so far received little attention and, thus, remained unexplained. This study demonstrates that it is not due to exciton quenching by external factors, but can be explained by a change in the morphology with decreasing film thickness.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:552267
Date January 2009
CreatorsShaw, Paul E.
ContributorsSamuel, Ifor D. W.
PublisherUniversity of St Andrews
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttp://hdl.handle.net/10023/831

Page generated in 0.0021 seconds