The diploma thesis deal with the proposal of connector manufacturing from bronze sheet CuSn6, thickness 1.5mm in production volume of 1.600.000 parts per year. From considered manufacturing variants there was chosen shearing and forming technology of thread in the progressive stamping die. For part production was selected pressing machine Bruderer 1250 with nominal pressing force 1250 kN from company E. Bruderer Maschinenfabrik AG. In the economical evaluation there were determined expenses 21.6 Kč per one piece including demanded profit. The turning point was calculated at production of 165.522 parts.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231636 |
| Date | January 2014 |
| Creators | Kočka, Jiří |
| Contributors | Rumíšek, Pavel, Žák, Ladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds