This work is focused on the design and construction of component parts of resistance saw. Mechanical parts consist of a movable bracket and a taut cutting wire of Constantan. Electrical parts are designed to supply and control temperature of the cutting wire. The current intensity in the cutting wire is compared with the required current intensity. The difference of these two measurements is fed into a PI - controller. The next part is a PWM generator which generates the square wave signal. The pulse ratio of this signal is proportional to the required temperature of the cutting wire. This signal switches a switching converter that consists of a power transistor P-MOSFET IRF5210 and a diode MBR20100CT. Choking coil with a ferrite E core and with the cutting wire is connected to the output of the converter.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217916 |
| Date | January 2009 |
| Creators | Kalčík, Petr |
| Contributors | Minárik, Vladimír, Procházka, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds