The aim of this thesis is to design the water-cooling system for a synchronous motor with an output of 10kW. The power loss was analytically determinated. For the initial water-cooling system and for two design proposals, thermal models were calculated in Ansys. The same boundary conditions were set for all three models. Then the analysis results of the temperature distribution on the machine surface and in the slots were compared. The comparison also includes the economical cost of the production and service of the machine. Then the production documentation was created, consisting of the assembly drawings and a simplified technological process.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:432781 |
| Date | January 2020 |
| Creators | Vaněrková, Tereza |
| Contributors | Vlach, Radek, Huzlík, Rostislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds