The diploma thesis is aimed to the influence of the high-pressure and low-pressure coolant system according to the machining operation. The comparison was carried out with different types of materials and cutting tools using the main machining operations – turning, milling, and drilling. The study is focused on the chip and heat removal from the cutting zone, tools life and wear of the tools. A description of the basic principle of the high-pressure coolant system meant is described in this thesis. The economical analysis of the high-pressure compared to low-pressure system was determined in the last part of this work.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228838 |
| Date | January 2009 |
| Creators | Hort, Martin |
| Contributors | Peterka, Václav, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds