Return to search

Estudo da corros?o no a?o carbono 1020 protegido com ?leo de coco saponificado: an?lise f?sico-qu?mica do comportamento qu?mico do tensoativo

Made available in DSpace on 2014-12-17T15:41:49Z (GMT). No. of bitstreams: 1
DanyelleMA_DISSERT.pdf: 886887 bytes, checksum: bdfc465050e9656b4d629363ccd362a0 (MD5)
Previous issue date: 2010-07-29 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Corrosion inhibitors in solution are utilized to minimize processes from
corrosion in steel. Of the present dissertation was evaluated the efficiency by
inhibition from the surfactant saponified coconut oil (OCS) in the carbon steel 1020
through in linear polarization electrochemistry technique, well as, studied the process
from adsorption through from the isotherms from Langmuir, Frumkin and Temkin.
The corrosion current was determined through in Tafel extrapolation from the curves
in the polarization, and then, was calculated the efficiency in the inhibitor to each
concentration and temperature. Were studied four concentrations (12,5 ppm, 25
ppm, 50 ppm, and 75 ppm) in the inhibitor OCS and one in the NaCl salt (10.000
ppm) in six temperatures (301 K, 308 K, 313 K, 318 K, 323 K, and 328 K) in triplicate.
By the results obtained observed that the technique applied can evaluated with
rapidity and efficiency corrosion inhibitors. In relation to the isotherms, the than best
appropriated was the in Langmuir and in the concentrations studied, the that
obtained the best efficiency was the concentration of 75 ppm / Inibidores de corros?o em solu??o s?o utilizados para minimizar processos de
corros?o em a?o. Na presente disserta??o foi avaliada a efici?ncia de inibi??o do
tensoativo ?leo de coco saponificado (OCS) no a?o carbono 1020, atrav?s da
t?cnica eletroqu?mica polariza??o linear, bem como, estudado o processo de
adsor??o atrav?s das isotermas de Langmuir, Frumkin e Temkin. A corrente de
corros?o foi determinada atrav?s da extrapola??o de Tafel nas curvas de
polariza??o e, ent?o, foi calculada a efici?ncia do inibidor para cada concentra??o e
temperatura. Foram estudadas quatro concentra??es (12,5, 25,0, 50,0 e 75,0 ppm)
do inibidor OCS e uma do sal NaCl (10.000 ppm) em seis temperaturas (301, 308,
313, 318, 323 e 328 K) em triplicata. Pelos resultados obtidos, observou-se que a
t?cnica utilizada pode avaliar com rapidez e efici?ncia inibidores de corros?o. Em
rela??o ?s isotermas, a que melhor se adequou foi a de Langmuir e dentre as
concentra??es estudadas a que obteve a melhor efici?ncia foi ? concentra??o de 75
ppm

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/17628
Date29 July 2010
CreatorsAraujo, Danyelle Medeiro de
ContributorsCPF:13893734449, http://lattes.cnpq.br/2791074318745945, Huitle, Carlos Alberto Martinez, CPF:01139059980, http://lattes.cnpq.br/2485073932883264, Moura, Everlane Ferreira, CPF:28929136320, http://lattes.cnpq.br/5157139686256561, Cavalcante, Maria Gorette, Silva, Djalma Ribeiro da
PublisherUniversidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Qu?mica, UFRN, BR, F?sico-Qu?mica; Qu?mica
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.01 seconds