Costs saving measures are important for South African gold producers due to increasing energy costs and decreasing production volumes. Demand Side Management (DSM) is an effective strategy to reduce electricity consumption and costs. DSM projects have been implemented widely on South African mining systems such as pumping, refrigeration, rock transport and compressed air. Implementations have, however, been limited on gold processing plants despite the significant amounts of energy that this section consumes.
The main objective of gold processing plants is production orientated and energy management is not a primary focus. This rationale is re-evaluated owing to high electricity price inflation and availability of DSM incentives. This study investigated the cost saving potential of DSM interventions on gold plants. Electrical load management was identified as a key opportunity that can deliver substantial cost savings. These savings were shown to be feasible in respect of the required capital expenditure, effort of implementation and maintenance of operational targets.
Investigation procedures were compiled to identify feasible load management opportunities. The most potential for electricity cost savings was identified on comminution equipment. Consequently, a methodology was developed to implement electrical load management on the identified sections. The methodology proposed simulation techniques that enabled load management and subsequent electricity cost optimisation through production planning.
Two electrical load management case studies were successfully implemented on comminution equipment at two gold processing plants. Peak period load shift of 3.6 MW and 0.6 MW, respectively, was achieved on average for a period of three months. The annual cost savings of these applications
could amount to R1.4-million and R 660 000. This results in specific electricity cost reductions of 3% and 7% for the two respective case studies.
Results from the two case studies are an indication of potential for electrical load management on South African gold processing plants. If an average electricity cost saving of 5% is extrapolated across the South African gold processing industry, the potential cost savings amount to R 25-million per annum. Although the costs saving opportunities are feasible, it is influenced by the reliability of the equipment and the dynamics of ore supply. This insight plays a decisive role in determining the feasibility of DSM on gold processing plants. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nwu/oai:dspace.nwu.ac.za:10394/15279 |
| Date | January 2014 |
| Creators | Hamer, Waldt |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds