The phenolic resin chemistry is an old chemistry that started in the late 1800’s. A lot of research work to gain understanding of phenolic resins has been done and reported in literature. However, most of the studies are based on phenol novolac resins. It was necessary to acquire more knowledge on specifically o-cresol novolac (OCN) resins because of the interest in the production of these resins. The chemistry in question was new to Sasol and one of the major objectives of doing this work was to build in-house competency in this field. This was achieved by first investigating whether the available feed materials containing certain impurities can be used to synthesise o-cresol novolacs with set specifications of purity and physical characteristics. The suitability of the Sasol o-cresol in terms of its contamination with sulfur (which is sometimes found in relatively higher amounts due to operating conditions) was investigated. The results showed that the sulfur in o-cresol did not have a significant contribution in the sulfur of the OCN. Another contaminant, formic acid, an auto-oxidation product found in formalin solutions was also investigated. It was also observed that, at formic acid levels of up to 4000 ppm, there was no effect on the softening point of the OCN. Secondly, it was important to study and understand the effect of different reaction variables on the quality of the OCN resins. The effect of formaldehyde: o-cresol molar ratio was investigated, the softening point increased with the increase in the molar ratio. The effects of other reaction variables (catalyst, reaction time, temperature and formaldehyde feed rate) on the softening point of the OCN were also investigated using p-toluenesulfonic acid and oxalic acid as catalysts. With p-toluenesulfonic acid as a catalyst, the temperature had no effect on the softening point, while all the other variables showed an effect on this parameter. A softening point model was formulated, which predicted the softening point with 98% accuracy. With oxalic acid, only the amount of catalyst had an effect. In addition, the chemical structures of these compounds were studied using 13C-NMR spectroscopy. The focus was on the isomer distribution of the methylene linkages. / Prof. D.B.G. Williams
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:1874 |
| Date | 19 May 2008 |
| Creators | Sitetyana, Pindiwe |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0015 seconds