Return to search

Cross flow filtration of oil sands total tailings

This research is a follow up to preliminary studies reported by Beier and Sego (2008) and the objective is to investigate laboratory scale dewatering of oil sands total tailings using cross flow filtration technology. A laboratory experiment was setup in Oil Sands Tailings Research Facility and tests were carried out under different operational conditions using different tailings. The experiments showed clean filtrate water generated under all test conditions. Coarser tailings and higher filter pipe porosity resulted in greater filtrate flux rate. The effect of slurry velocity, residual bitumen, and transmembrane pressure on cross flow filtration performance was also evaluated. A dimensional analysis was developed using the laboratory tests to establish the relationships between measured parameters and to assist and guide future experimental programs. / Geotechnical Engineering

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/1201
Date11 1900
CreatorsZhang, Chenxi
ContributorsSego,David (Civil and Environmental Engineering), Ulrich,Ania (Civil and Environmental Engineering), Kresta,Suzanne (Chemical and Materials Engineering), Rajaratnam,Nallamuthu (Civil and Environmental Engineering), Askari-Nasab,Hooman (Civil and Environmental Engineering)
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format1516583 bytes, application/pdf

Page generated in 0.0017 seconds