The small satellite community understands that small satellite missions need to produce two models of the satellite. The flight model is the final model of the spacecraft, which will fly in the space environment. The other, an engineering model, also known as a ”Flat-Sat,” is a lower fidelity prototype of the flight model. For most mission classes, many design alternatives exist for engineering models and tools to build them. However, this is different for Low Earth Orbit (LEO) CubeSats. Some engineering models are cost-prohibitive for these missions, while others need to offer more features to troubleshoot hardware/software-related issues effectively. This thesis presents a design for a FlatSat motherboard, a cost-effective alternative that allows engineers to build and test their design with flight hardware for LEO satellite missions. First, this thesis will cover the motherboard’s schematic capture and PCB design. Then this thesis will cover functional testing of the motherboard itself. Finally, testing will cover the payload control module, a flight computer to manage all of the payloads on the UtProSat-1 CubeSat mission the payload control module (PCM) the payload computer flying on UtProSat-1. Space@VT expects a dramatic increase in reliably testing all satellite features with this motherboard while drastically reducing the cost for future satellite missions at Virginia Tech. / Master of Science / The small satellite community understands that small satellite missions need to produce two models of the satellite. The flight model is the final model of the spacecraft, which will fly in the space environment. The other, an engineering model, also known as a ”Flat-Sat,” is a lower fidelity prototype of the flight model. For most mission classes, many design alternatives exist for engineering models and tools to build them. However, this is different for Low Earth Orbit (LEO) CubeSats. Some engineering models are cost-prohibitive for these missions, while others need to offer more features to troubleshoot hardware/softwarerelated issues effectively. This thesis presents a design for a FlatSat platform, that allows engineers to build and test their design with flight hardware for LEO satellite missions. First, this thesis will cover the motherboard’s schematic capture and PCB design. Then this thesis will cover functional testing of the motherboard itself. Finally, this thesis will cover the testing of the payload control module, a flight computer to manage all of the payloads on the UtProSat-1 CubeSat mission the payload control module (PCM) the payload computer flying on UtProSat-1.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/118710 |
Date | 14 November 2023 |
Creators | Gibbons, Richard F., III |
Contributors | Electrical and Computer Engineering, Black, Jonathan T., Earle, Gregory D., Kenyon, Samantha P. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Thesis, Text |
Format | ETD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds