This thesis deals with a proposal of versatile autonomous circuit equivalents of floating and grounded passive elements by means of modern active tectonic blocks, such as current and voltage conveyors of all three generations. Current conveyors range as essential tectonic blocks in a current mode. Concerning signal processing, it encompasses a mixed tectonic block. In most cases, these elements may be substituted for presently insufficient operating amplifiers. The voltage conveyor was defined on the basis of duality of current and voltage modes. This element could be selected as a suitable active component for circuits operating in a voltage mode. Implementing the connection, a general autonomous circuit is taken into account. By selecting given admittances, a FDNR (floating frequency dependent negative resistance) element, floating capacitance, floating inductance and ground to floating admittance converter may be implemented. The practical part describes connections which fulfill given requirements. The suggested elements are simulated in comparison with ideal elements and subsequently, they are applied to a frequency filter. The second order filter with a proposed induction coil was practically assembled and experimentally measured in a laboratory. The measured results were compared to simulations received by the use of ideal and real models of current and voltage conveyors.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219295 |
| Date | January 2011 |
| Creators | Štěpán, Radim |
| Contributors | Koton, Jaroslav, Herencsár, Norbert |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds