<p>Normally the operational amplifier is used as a component in active filter design. The goal for future components in filter design is large bandwith and the use of low supply voltages. The use of current-mode instead of voltage-mode circuits gets a step closer to the required performance. A component that use current as the signal conveying part is the current conveyor. In this report a comparative study between two current conveyor structures of second generation (CCII) is performed. The most suited is later implemented and simulated using the CMOS process AMS.C035. The component is also tested in a continuous-time elliptic low-pass filter of leapfrog type. The filter does not behave as it should. However, better performance can be obtained by redesigning the current conveyor.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-1976 |
| Date | January 2003 |
| Creators | Jonasson, Anders |
| Publisher | Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, text |
| Relation | LiTH-ISY-Ex-ET, ; 0259 |
Page generated in 0.0019 seconds