ABSTRACT
This research uses Taguchi Method, combined with Computer Aided Design and Manufacturing, processing the work piece into the saddle type. Next, diverse sampling methods are applied to measure the profile of surface with Coordinate Measuring Machine, with an aim to analyzing the main factors that influence cutting and seeking the last conditions for cutting out the curved surface; in addition, I will probe into the contribution rate of each factor which influences the precision during the process of measurement.
The following results of this research are expected to be offered to the circles of vocational education as a basis of processing and measuring instruction. In this way, it will not take too much time to try and error and therefore, the practice course can be more efficient.
1. With reference to the documents that are focused on the factors affecting the cutting, this thesis, by means of Taguchi Method, shows that during the process of cutting saddle-type curved surface, the rotating speed of the axle is the most influential, whose contribution rate is 59.38%.
2. Since most documents are on circles, balls or cone objects, this thesis will aim at the measurement of saddle-type curved surface, with an intention to further the measuring technique.
3. It is found that as to the saddle-type curved surface, random sampling can get the profile of surface with minimal errors, and has no such trouble as using HSS or LHS, which can reduce time and cost.
4. In the experiment of Taguchi Method, according to analysis of variance, the influence of the sampling area is the greatest while the choice of sampling method only contributes to 3.46%.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0630106-174450 |
| Date | 30 June 2006 |
| Creators | Wang, Hsueh-o |
| Contributors | Ying-Chien Tsai, Innchyn Her, Der-Min Tasy |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0630106-174450 |
| Rights | campus_withheld, Copyright information available at source archive |
Page generated in 0.0019 seconds