This dissertation treats of the influence of PVD coats to a change of tool lifetime. The theoretical part of the dissertation describes the adjustment of tools before the process of coating. Following part describes the specific properties of deposited layers of the coating and its measuring. There is also the enumeration and specification of selected ways of depositing PVD coats and brief description of its advantages and disadvantages. Second part of the dissertation is focused on an experiment with measuring of the tool force loading and its change depending to the tool wear. There are compared four short four-edged milling cutters with a coat and as well without it. Those tools were made of high speed steel by the conventional way and also by the powder metallurgy. Milling operation was done by down and up milling technique. The evaluation of the experimental results for powder metallurgy tools confirmed that these tools are advantageous compared to the standard high speed steel tools.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229048 |
| Date | January 2010 |
| Creators | Matuška, Martin |
| Contributors | Sedlák, Josef, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds