The optimal choice of cutting conditions, as well cutting tool, has a significant effect on the quality of machined part and is an essential parameter to reduce the cost of production. This thesis describes CNC turning process of disc springs made of 51CrV4 material, especially using new cutting tools and the use of higher cutting speeds. A comparison of four manufacturers of cutting tools in terms of surface quality, tool path and the machined material volume will be introduced. It was experimentally verified that our proposed facility has achieved the best result.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230514 |
| Date | January 2013 |
| Creators | Křupka, Marek |
| Contributors | Humár, Anton, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds