Manufacturers of saw chains continuously strive to increase the performance of their products by reducing cutting times and minimising the energy consumption required for cutting. However, the evaluation process through testing is problematic as several uncontrollable factors impact the results. A large source of uncontrollable factors is the material used as a workpiece. Historically, wood has been used as a workpiece material since it is often what the end user will use it for. As a natural material, each stem contains a unique structure and can have a high variation in mechanical properties. Consequently, the analysis of older cutting efficiency is problematic since the result is linked to the specific stem being sawn, which is destroyed during the testing process. The current work aims to improve the repeatability of these tests by increasing the understanding of which material characteristics and material properties impact the variance during cutting efficiency measurements. An experiment was performed using pine as a workpiece material. It was found that the wood structure, density and hardness or moisture content could explain approximately 80% of the variation in the final tests. A more homogeneous material polyethylene was used to explore if a decrease in variation within these factors resulted in lower variance between cutting efficiency results. The variance between results was found to be lowest in pine when knots were excluded. The variance in polyethylene was slightly higher but showed promising evidence for being a suitable alternative material for long-term testing.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hj-62075 |
| Date | January 2023 |
| Creators | Ödvall, Petter, Ivarsson, Jakob |
| Publisher | Jönköping University, Jönköping University |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0019 seconds