A direct numerical simulation study has been conducted to examine the flow that develops on long circular cylinders that are aligned, or nearly aligned, with the freestream. Results are presented for turbulent boundary layers and vortex - shedding yawed flow. Although flows of these types occur in a range of engineering applications, they remain relatively unexplored compared with flat - plate flow. The numerical scheme employed for solution of the governing Navier - Stokes equations is similar to that used in some previously published simulations, but here rather different boundary conditions are adopted. At the outer edge of the cylindrical computational domain, the imposed boundary conditions confine the vorticity field within a finite radius while allowing the continuous velocity field to converge to the free - stream velocity at large distances from the cylinder. Axial flows are considered with radius Reynolds numbers in the range 311 to 20800, ratios of boundary layer thickness to cylinder radius in the range 0.15 to 27.5, and boundary layer thicknesses of between 160 and 800 viscous units ( v / u [subscript τ] ). The mean - flow and turbulence statistics for axisymmetric boundary layers are found to differ significantly from flat - plate results when the boundary layer is strongly curved, that is when the boundary layer is thick in relation to the cylinder radius. The effects of curvature are mainly observed in the outer flow except when the cylinder radius in viscous units is small. Particular attention is given to the assessment of similarity scaling relations for the mean velocity profile, velocity fluctuation statistics and temporal wall - pressure spectra. Structural features of axisymmetric turbulence are examined by inspection of instantaneous flow fields, correlation functions and conditionally - averaged flow structures. In very thick boundary layers on thin cylinders, the simulations reveal evidence of large - scale fluid motion across the cylinder, although the mechanisms of turbulence generation do not appear to be significantly different from those in flatplate flow. Simulations of turbulence in near - axial flow over cylinders are considered with radius Reynolds numbers up to 674 and yaw angles up to 0.5 degrees. No previous flow simulations of this kind are reported in the literature. The mean - flow and turbulence statistics are found to depart rapidly from axisymmetry as the yaw angle increases. The quality of the calculated results suggests that the computational procedure is suitable for use in a more comprehensive investigation of near - axial flow over cylinders. For cylinders inclined at sufficiently large yaw angles to the free - stream, turbulent boundary layer flow gives way to oblique vortex - shedding from the cylinder. Simulated flow fields corresponding to a radius Reynolds number of 311 and a yaw angle of 3 degrees are examined to reveal the three - dimensional structure of the flow. The results suggest that the oscillating flow fields in the cylinder wake have the character of a wave travelling in the axial direction at the same speed as the axial component of the free - stream. / Thesis (Ph.D.)--School of Mechanical Engineering, 2006.
Identifer | oai:union.ndltd.org:ADTP/263725 |
Date | January 2006 |
Creators | Woods, Milton Jude |
Source Sets | Australiasian Digital Theses Program |
Language | en_US |
Detected Language | English |
Page generated in 0.0012 seconds