Novel biomaterials provide a spectrum of possibilities. They can be engineered in different forms to understand how they would perform as different bioprosthetic conduits. Bacterial cellulose membranes may be suitable candidates as prosthetic valve leaflets in valve replacement surgeries due to their functional properties (hemodynamics, resistant to thrombosis). Biomaterials used for most bioprosthetic heart valves are cut, trimmed and sutured. A major challenge for the bi-leaflet configuration is that the cutting and suturing of biopolymers fabricated as sheets into a cylindrical form increases failure risk due to greater number of suture points and irregular coaptation. The objective was to culture the bacterial cellulose membrane as a continuous cylindrical construct and evaluate its mechanical properties. Various design features of the fabrication process such as culturing media and the hollow carrier-mandrel characteristics were evaluated. A comparative study of how bacterial cellulose grows on different hollow carrier membranes was conducted and thin smooth surface silicone tubes fabricated in the lab were found to be most suitable. A bioreactor for culturing cylindrical bacterial cellulose tubes on the outer surface of the hollow carrier was designed and fabricated. The mechanical properties of the fabricated tubes, specifically, their tensile strength, flexure, suture retention and tear resistance were characterized. Mechanical characterization studies showed the cylindrical bacterial cellulose tubes to be anisotropic, with preferential properties in the longitudinal (axial) direction of the tube. Preliminary results show that cylindrical bacterial cellulose tubes can be a promising candidate for use in prosthetic valve conduits.
Identifer | oai:union.ndltd.org:uiowa.edu/oai:ir.uiowa.edu:etd-7996 |
Date | 01 August 2016 |
Creators | Sarathy, Srivats |
Contributors | Raghavan, Madhavan L. |
Publisher | University of Iowa |
Source Sets | University of Iowa |
Language | English |
Detected Language | English |
Type | thesis |
Format | application/pdf |
Source | Theses and Dissertations |
Rights | Copyright © 2016 Srivats Sarathy |
Page generated in 0.002 seconds