The demand for high power density, high efficiency bus converters has increased interest in resonant topologies, particularly the LLC resonant converter. LLC resonant converters offer several advantages in efficiency, power density, and hold up time extension capability. Among high voltage (>500V) MOSFETs, Super Junction MOSFETs, such as Infineon's CoolMOS parts, offer lower Rds on than conventional parts and are a natural choice for this application to improve efficiency. However, there is a history of converter failure due to reverse recovery problems with the primary switch's body diode. Before selecting CoolMOS devices for use in a LLC resonant converter, it is necessary to investigate its performance in this application. Field failures of PWM soft switching phase shift full bridge converters have been attributed to large reverse recovery charge in the primary side MOSFET body diode. Under low load conditions the device cannot fully recover, and the large reverse recovery current can cause the device to enter secondary break down, leading to failure. The unique structure of Super Junction MOSFETs, such as CoolMOS, avoid this failure mode by providing a different path for the reverse current; however, the reverse recovery charge of CoolMOS devices is large and can cause a loss of efficiency. For this reason, it is important to avoid conditions under which the reverse recovery characteristics of the body diode can be seen. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/31746 |
| Date | 23 April 2008 |
| Creators | Person, Clark Edwin |
| Contributors | Electrical and Computer Engineering, Wang, Fei Fred, Xu, Ming, Lee, Fred C. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | cperson_thesis_final.pdf |
Page generated in 0.0806 seconds