To support the increasingly demanding requirements for power conversion units, a digitally controlled dual output stage buck converter is designed. The system consists of a dual output stage, which includes an auxiliary buck output stage connected in parallel with a main output stage. The auxiliary output stage is only active during load transient to suppress the output voltage variation. A digital controller is designed to control both stages with a linear/nonlinear control scheme. Nonlinear control is applied during load transient based on the capacitor charge balance principle; whereas linear PID control governs the steady state operation. The design is verified with simulation and experimentally with discrete components. The controller is realized with a FPGA with preset output stage parameters. The experimental result shows a 60% reduction of output voltage variation for a heavy-to-light load transient.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/18935 |
Date | 15 February 2010 |
Creators | Ng, Kendy Chun-Wa |
Contributors | Ng, Wai Tung |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.0021 seconds