This work deals with high power pulse converters (tens of kW) using new semiconductor devices of silicon carbide (SiC). Firstly the current state of the issue is analyzed. A research in a specific area of high power buck converters with pulse transformer follows. There was a strong emphasis on minimizing size and weight. The design process was focused also on reliability and robustness. To achieve the defined objectives, it was necessary to use the latest available switching transistors and diodes, and an unusually high switching frequency (100 kHz at a power of about 16 kW). Due to the high switching frequency, we achieved small size of pulse transformers and output chokes. An optimization of high-frequency pulse transformer with demand on minimum volume and weight of core and windings represents a separate theoretical part of the thesis. There have been proposed several analytical solutions of optimization problems, the results of which could overlap with the implementation in practice of switching power supplies. The combination of high switching frequency, fast semiconductors and the high power brings various parasitic effects to the power circuit. In the thesis, these parasitic effects are analyzed. Solutions which minimize or completely remove those effects were theoretically designed and successfully implemented, tested and finalized in experimental part of the work. Detailed description of the implementation of functional sample and series of validation measurements are included in the final part.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233651 |
Date | January 2014 |
Creators | Kuzdas, Jan |
Contributors | Chlebiš,, Petr, Drábek,, Pavel, Vorel, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds