This thesis studies residential dc distribution system with primary focus on point-of-load (POL) converters. The growing number of inherently dc loads, increasing penetration of distributed energy resources (DERs) and advancements in power electronic converters are some of the reasons to reconsider the existing residential ac distribution system. A dc distribution system can achieve higher efficiency by eliminating the ac-dc rectifiers and power factor correction stages currently used in most domestic electronic appliances. In this thesis, 380V is identified as a suitable voltage level for the main dc bus. Safety issues are discussed and common domestic loads are characterized. Two common converter topologies – buck and flyback converters are suggested as POL converters for heating and LED lighting loads respectively. State-feedback control is designed and implemented for buck converter and current mode control of flyback converter is implemented. A 500W POL buck converter using state-feedback with integral control is designed and tested for heating load applications. Finally a small dc distribution system is simulated using the converter models. The response of the system is stable under load and line changes. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2012-05-4971 |
| Date | 09 July 2012 |
| Creators | Desai, Harshad Suresh |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.002 seconds