Research in sustainable energy sources has become the interest of many studies due to the increasing energy demand and the amount of wasted energy released from existing methods, along with their effect on climate change and environment sustainability. Thermo-Electric Generators (TEGs) are a potential solution that is being studied and implemented as they can convert low grade thermal energy to useful electrical energy at various operating conditions.
The integration of a TEG within a heat exchanger (TEG/HX) system connected to an electrical DC micro-grid, using a Maximum Power Point Tracking (MPPT) system is the focus of this study. Using a numerical TEG/HX model from a previous study and a developed DC micro-grid model the interaction between the thermal and electrical aspects were investigated with the focus on the electrical performance of the system.
The main concern of this study is to investigate the effect of the sub components of the DC micro-grid on the overall available energy. An analytic model was developed to estimate the power loss in the electrical circuit of the micro-grid, the model utilizes the equations for switching and conduction losses which have been used by several studies. Other variables such as the battery characteristics and electrical load profiles were also investigated by simulating several case studies including changing operating conditions.
This study shows the effect of a TEG configuration on the power loss in an electrical system using power loss curves in comparison with the Open Circuit Voltage (OCV) of such configuration. It also covers important modes of operation for the battery, loads and MPPT for a stable and reliable operation of an isolated DC micro-grid system were TEGs are the only source of power.
The result of the study presented is a system design that is able to maximize the electrical energy harvested from the TEGs to extend the operation of the dc-micro-grid first by applying a suitable TEG configuration and consequently a suitable electrical circuit. Secondly, by adapting to the changing operating conditions of the TEGs and the loads; and compensating for these changes using the battery storage system. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/23379 |
| Date | 06 1900 |
| Creators | Elrakaybi, Ahmed |
| Contributors | Cotton, James, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.3094 seconds