The intention of this thesis is the experimental evaluation of different lubricants and their suitability for deep drawing of stainless steel 1.4404. The testing method is based on the friction model at the point of drawing edge and retainers. This model corresponds with a structure of testing fixture. The suitability of every single lubricant for this application has been determined by comparison of the output, which is dependance of the strength on the track with the reference results. The testing has been performed on many different samples provided by various manufacturers. The best result was measured with the oil Kalorex AT 650 S, manufactured by AT Oil, which belongs to the group of environmentally harmful lubricants. Based on the results of this experiment we can conclude that chlorine content significantly increases the lubrication capability especially under high pressure. The modification of preparation geometry which presumes the elimination of certain undesirable disturbances accompnaying the experiemnt has been also proposed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231053 |
| Date | January 2015 |
| Creators | Mück, Jonáš |
| Contributors | Staněk, Vojtěch, Lidmila, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds