The method of percussive rotary drilling is recognized as the most efficient method for hard rock drilling. Despite the clear advantages over conventional rotary meth-ods, there are still uncertainties associated with percussive rotary drilling. For geothermal applications, it is estimated that 50 % of the total cost per installed megawatt of energy is associated with drilling and well construction, with drill bit wear being a predominant cost factor. Numerical modelling and simulation of rock drilling, calibrated and validated towards rigorous experiments, can give insight into the rock drilling process. This thesis is focused on the prerequisites of numer-ical simulations of rock drilling, i.e. the development of a numerical model and experimental characterization of rock materials. A new approach for modelling brittle heterogeneous materials was developed in this work. The model is based on the Bonded Particle Method (BPM) for the Discrete Element Method (DEM), where heterogeneity is introduced in two ways. Firstly, the material grains are rep-resented by random, irregular ellipsoids that are distributed throughout the body. Secondly, these grains are constructed using the BPM-DEM approach with mi-cromechanical parameters governed by the Weibull distribution. The model was applied to the Brazilian Disc Test (BDT), where crack initiation, propagation, coalescence and branching could be investigated for different levels of heterogene-ity and intergranular cement strengths. The initiation and propagation of the cracks were found to be highly dependent on the level of heterogeneity and cement strengths. In the experimental study, the static and dynamic properties of two rock materials - Kuru grey granite and Kuru black diorite - were obtained from uniaxial compression and indirect tension tests. A Split-Hopkinson Pressure Bar was used to obtain the dynamic properties. Using high-speed photography with frame rate 663,000 fps, the crack initiation and propagation could be studied in de-tail, and the full-field exterior deformation fields of the samples were evaluated by using digital image correlation. From the high-speed images, the onset of unstable crack growth was detected. The crack-damage stresses, associated with unstable crack growth, was approx. 90 % of the peak strength in the dynamic compression tests, whereas the tensile crack-damage stress was approx 70 % of the tensile peak strength.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-83911 |
Date | January 2021 |
Creators | Wessling, Albin |
Publisher | Luleå tekniska universitet, Material- och solidmekanik, Luleå |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | Licentiate thesis / Luleå University of Technology, 1402-1757 |
Page generated in 0.0017 seconds