Thin film Nanocomposite (TFN) membranes are a relatively new class of high-performance semipermeable membranes for Reverse Osmosis (RO) applications. Large scale applications of TFN membranes have not been achieved yet due to the high production cost of the nanoparticles, agglomeration of the nanoparticles in the thin polyamide matrix of the membrane, and leaching out of typically toxic inorganic nanoparticles into the downstream.
In this work, these challenges are addressed by incorporation of two different nanofillers: Cellulose NanoCrystals (CNC), and surface functionalized Halloysite NanoTubes (HNT). Amine groups, carboxylic acid groups, and the first generation of poly(amidoamine) (PAMAM) dendrimers were used for functionalization of the HNT. CNC and HNT are environmentally friendly, low/non-toxic, abundant, and inexpensive nanoparticles with a unique size, and chemical properties. TFN membranes were synthesized via in situ interfacial polymerization of m-phenylenediamine (MPD) with trimesoyl chloride (TMC) and the nanoparticles. The control Thin Film Composite (TFC) membranes, and CNC and HNT based TFN membranes were characterized by Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared spectroscopy (FTIR) and contact angle measurements. The antifouling capacity of CNC based membranes was investigated with a solution of Bovine Serum Albumin (BSA) as the fouling agent. Also, the leachability of the HNT from the membranes was examined by shaking the membranes in a batch incubator for 48 h, and then tracing the leached out HNT using Inductively Coupled Plasma Mass Spectrometry (ICP-MS).
Separation characteristics of the membranes were studied by desalination of synthetic brackish water with a cross flow RO filtration system. It was revealed that incorporation of functionalized HNT enhanced the permeate flux without sacrificing the salt rejection (99.1 % ± 0.1 %). Also, incorporation of 0.1% (w/v) CNC doubled the permeate flux (from 30 to 63 L/m2.h at 20 bar) without compromising the salt rejection (97.8%). At the same time, leaching out of HNT from the TFN membranes was decreased as a result of the HNT functionalization and formation of covalent bonds with the TMC. Also, antifouling properties of the CNC-TFN membranes were 11% improved in comparison with control TFC membrane.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/36737 |
| Date | January 2017 |
| Creators | Asempour, Farhad |
| Contributors | Kruczek, Boguslaw |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0022 seconds