This paper describes a new application for servopneumatic drives. In a battery module for automotive applications the pouch cells are clamped between frames. During the assembly the frames needs to be clamped permanently. So a clamping system comprising two drives was developed, which moves four clamp fingers each alternating.
In the first chapter the application is described in detail. The second chapter includes a comparison of servoelectric and servopneumatic drives for this application with respect to energy consumption, installation space and purchase cost. The developed clamping unit is described in chapter three as well as a verification of the influence of the preload force on the straightness of the stack. At the end of this paper the conclusions are summed up.
Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-200433 |
Date | 03 May 2016 |
Creators | Gauchel, Wolfgang, Haag, Sebastian |
Contributors | Dresdner Verein zur Förderung der Fluidtechnik e. V. ,, Technische Universität Dresden, Fakultät Maschinenwesen |
Publisher | Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden |
Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
Language | English |
Detected Language | English |
Type | doc-type:conferenceObject |
Format | application/pdf |
Source | 10th International Fluid Power Conference (10. IFK) March 8 - 10, 2016, Vol. 3, pp. 137-148 |
Page generated in 0.0014 seconds