This thesis presents methods to place landing sites for the Urban Air Mobility (UAM) concept. The analysis shows an integrated approach to establish UAM landing site requirements, place landing sites based on predicted demand, and estimate the costs associated with UAM landing sites. This thesis also makes estimates of fares associated with UAM operations. The methods presented are applied to three large urban centers in the United States. The analysis assumes an all-electric, advanced multi-rotor aircraft with autonomous navigational and Vertical Takeoff and Landing (VTOL) capabilities to estimate UAM landing site requirements. The thesis presents the land area requirements of UAM landing sites using Federal Aviation Administration heliport design criteria considering ground-taxi configurations. The analysis performed employs a UAM vehicle with an equivalent Rotor Diameter (RD) of 43 feet. In this thesis, UAM demand is estimated using a mode choice model developed in a companion study (UAM Scenario Analysis).
The methodology to locate UAM landing sites includes splitting and consolidation of UAM landing sites considering the Zillow Transaction and Assessment Dataset (ZTRAX) to introduce land-use size and cost constraints. The sites are split using a K-Means clustering method and are consolidated using a simple center of mass approach where the demand of each landing site is analogous to mass. The results presented in this thesis apply to 75 and 200 landing sites in each region and assume passenger Cost-Per-Mile (CPM) of $1.20 and $1.80, respectively. This thesis presents a comparative study on how the availability of land affects the splitting, consolidation, and relocation of UAM landing sites for each region, the number of landing sites, and the cost per passenger-mile. / Master of Science / This thesis aims at the landing sites for the Urban Air Mobility (UAM) concept for commuting passengers in Northern California (17 counties), Southern California (9 counties), and Dallas-Fort Worth (12 counties) region. The aircraft for this service is designed to be an all-electric advanced multi-rotor aircraft with autonomous navigational and Vertical Takeoff and Landing (VTOL) capabilities. The commuting trips considered is focused on passengers traveling to work from home and back.
This thesis presents the land area requirements of these landing sites, which are calculated from the Federal Aviation Administration's (FAA) Advisory Circular 150/5390-2C using ground-taxi configuration for a typical representative aircraft of an equivalent rotor diameter (RD) of 43 feet. The landing sites are then split into smaller sites and consolidated into larger sites. This thesis also presents a list of plots of land located within the 0.5 statute-mile boundaries of the landing sites for relocation. This entire analysis is based on the availability of land from the Zillow Transaction and Assessment Dataset (ZTRAX). The results presented in this thesis are for 75 and 200 landing sites set in the study area for a passenger Cost-Per-Mile (CPM) of $1.2 and $1.8, respectively. The results show how the availability of land changes for different CPM for a set of landing sites and affects the splitting, consolidation, and relocation of landing sites for each region. In the end, the thesis presents conclusions and recommendations unique to each region.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/104355 |
Date | 29 January 2020 |
Creators | Tarafdar, Sayantan |
Contributors | Civil and Environmental Engineering, Trani, Antonio A., Hotle, Susan, Heaslip, Kevin Patrick |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis |
Format | ETD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0019 seconds