Yes / This study established a dynamic damage constitutive model for ultra-high performance concrete (UHPC) with nanofillers, based on a viscoelastic dynamic constitutive model and a damage evolution equation. Ten types of nanofillers, including particle, tube and flake nanofillers, were incorporated to modify UHPC. The split Hopkinson pressure bar was used to obtain the relationship between stress and strain of UHPC specimens at a strain rate of 200/s-800/s. The experimental results indicated that the dynamic compressive strength of UHPC with nanofillers at strain rates of approximately 200/s, 500/s, and 800/s can reach 172.8 MPa, 219.6 MPa, and 275.9 MPa, respectively, reflecting an increase of 85.2 %, 76.5 %, and 53.9 % compared with the blank UHPC. The established dynamic damage constitutive model considered the damage accumulation with strains under dynamic loading. The fitting coefficients of the dynamic damage constitutive model, when compared against experimental results, range from 0.8796 to 0.9963, showing a higher accuracy compared with traditional Zhu-Wang-Tang (ZWT) viscoelastic model, especially at a strain rate of approximately 200/s. / National Science Foundation of China (52178118 and 52308236), and the China Postdoctoral Science Foundation (2022M720648 and 2022M710973) / The full-text of this article will be released for public view at the end of the publisher embargo on 5 Jan 2025.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/19936 |
| Date | 26 July 2024 |
| Creators | Yan, D., Qiu, L., Wang, J., Ashour, Ashraf, Wang, X. |
| Source Sets | Bradford Scholars |
| Language | English, English |
| Detected Language | English |
| Type | Article, Accepted manuscript |
| Rights | © 2024 Elsevier. Reproduced in accordance with the publisher's self-archiving policy. This manuscript version is made available under the CC-BY-NC-ND 4.0 license (http://creativecommons.org/licenses/by-nc-nd/4.0/), CC-BY-NC-ND |
Page generated in 0.0024 seconds