The aim of the thesis is to determine change of mechanical properties of three types of damp polymeric materials (polyamides) depending on the water content inside material. Before testing, specimens of all three types of materials were placed inside the air conditioning chambers until equilibrium (conditioned) state was reached when the specimens received the maximum possible amount of water from the environment. A total of three conditioning levels were set, representing besides the standard level of conditioning both extreme states like state when the material was fully dried and the state where the material content the largest possible amount of water. With the increasing content of water bound in material, there is a characteristic change in the mechanical properties of the material, such as a decrease in strength and modulus of elasticity and an increase in toughness and ductility. To examine material properties change, tensile and Charpy impact tests were performed, Charpy impact tests were performed for both specimens with and without a notch. Besides changes in mechanical properties, the rate of water absorption was also observed depending on the materials and its filling.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378385 |
Date | January 2018 |
Creators | Neužil, Tomáš |
Contributors | Řehořek, Lukáš, Válka, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds