The CMS Tracker is an all silicon detector and it is the biggest of its kind to be built. The system consists of over 15,000 individual detector modules giving rise to readout through almost 107 channels. The data generated by the Tracker system is close to 650 MB at 40 MHz. This has created a challenge for the CMS collaborators in terms of data storage for analysis. To store only the interesting physics data the readout rate has to be reduced to 100 Hz where the data has to be ltered through a monitoring system for quality checks. The Tracker being the closest part of the detector to the interaction point of the CMS creates yet another challenge that needs the data quality monitoring system. As it operates in a very hostile environment the silicon detectors used to detect the particles will be degraded. It is very important to monitor the changes in the sensor behaviour with time so that to calibrate the sensors to compensate for the erroneous readings. This thesis discusses the development of a monitoring system that will enable the checking of data generated by the tracker to address the issues discussed above. The system has two parts, one dealing with the data used to monitor the Tracker and a second one that deals with statistical methods used to check the quality of the data.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:557706 |
| Date | January 2009 |
| Creators | Goitom, Israel |
| Contributors | Hobson, P. R. |
| Publisher | Brunel University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://bura.brunel.ac.uk/handle/2438/3785 |
Page generated in 0.0046 seconds