Return to search

Stanovení vlastností ultrazvukových sond / Properties of ultrasound probes

This master thesis deals with the measurement properties of ultrasound probes. Ultrasound probes and their parameters significantly affect the quality of the final image. Values of pa-rameters of the probes may change due to their use, because probes may be damaged and the final image may no longer be correct. For these reasons the measurements of parameters of probes are very important. In this master thesis there are described and implemented the possibility of measuring the spatial resolution, focal zone, the sensitivity of the probe and measuring the length of the dead zone. Two ultrasonic phantoms were used for measuring. In the practical part there was created the program called Mereni_parametru, which allows to determine the value of four parameters from captured images of the phantom. Further, there are listed and described measured values for five ultrasonic probes. Results for two of these probes are then compared with the parameters given by the manufacturers.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:221368
Date January 2015
CreatorsRusina, Michal
ContributorsMézl, Martin, Harabiš, Vratislav
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds