This thesis examines the challenges in creating a fully integrated optical receiver. Due to the nature of silicon, 850nm light exhibits a poor impulse response when directed at an on-die photodiode. Using a modified decision feedback equalizer with an infinite impulse response filter in the feedback path allows to eliminate the long tail of post-cursor ISI that is generated by the photodiode. Due to silicide depositions over the photodiodes, making them opaque, the receiver was tested using an electrical cable with similar frequency roll-off as that of a photodiode. A data rate of 3.7 Gbps was achieved and only limited by the amount of input reflections at the transimpedance amplifier. The receiver occupies an area of 0.23 mm^2 and consumes 51.3mW.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/29649 |
| Date | 29 August 2011 |
| Creators | Yasotharan, Hemesh |
| Contributors | Chan Carusone, Anthony |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds