The thesis deals with the design of a technological process for the production a rotationally symmetrical component, which is part of the body for the chassis ball joint of a passenger car. Thesis was developed on request and in cooperation with THK RHYTHM Automotive Czech a.s. On the basis of a literary study, a technological process consisting of 10 operations was designed and elaborated. For the prototype production of the component, a four-column hydraulic press SHPFS 250, with a nominal force 2500 kN, was selected and price offer were prepared. For each of ten operations a prototype tool was designed and prepared assembly drawings. To reduce costs, a single die set was designed to allow all tools to be clamped. The total cost of acquisition of the prototype hydraulic press and tools was set at CZK 2,672,950.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379001 |
| Date | January 2018 |
| Creators | Liškář, Ladislav |
| Contributors | Peterková, Eva, Lidmila, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds