This thesis deals with the proposal of an oil filter body manufacture. The oil filter body is a rotational part made of DC02 deep drawing steel. With respect to the material, geometry and the size of the production, a deep drawing technology which does not consider wall thinning, was chosen. It was decided about necessity of five drawing operations. Suitable presses for a notching line and the very drawing were selected. Next part of the thesis is given to the design of the rolling tool construction. A drawing die for the first operation is described in details, including the controls and drawings. The economic part compares variants with the requirements of monthly production of 50 000, 180 000 and 350 000 pieces respectively. Due to the economic study, the production of 180 000 pieces per month was chosen.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231003 |
| Date | January 2013 |
| Creators | Prokop, Karel |
| Contributors | Humlíček, Jaroslav, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds