Thesis submits concept of the sink fabrication technology where circular sink is made from rustproof austenitic steel 1.4301 (X5CrNi 18-10) using technology of conventional deep drawing without reducing wall’s thickness. Hydraulic press YL32 - 400 with nominal force 400 kN has been chosen as the production machine. Drawing tool with holder was designed to be used for this technology and its drawing documentation had been enclosed in this thesis. Size of the production series was set for 20 000 products annually. Control simulation of the drawing process has proven that designed component can be made and that computations are correct. Economic and technological estimation was performed which resulted in price being set for 555 czech crowns per piece. After manufacturing first 7 447 products the manufacturing process will become economically profitable.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318378 |
| Date | January 2017 |
| Creators | Pecha, Oldřich |
| Contributors | Dvořák, Milan, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds