Optimized slender and short-thick beams are used in building, aircraft and machine structures to increase performance at a lower material cost. A previous work proposes an optimum shape, material and size selection model to design lightweight slender beams under pure bending. In short-thick beams, the transverse shear effects are no longer negligible and impact the choice of the optimum shape. This work extends such an optimum selection model to consider both slender and short-thick beams, by formulating the total beam stiffness design requirement as a combination of shear and bending stiffness. Selection charts are developed to show the impact of design variables, such as shape, size, material and slenderness, on the total beam stiffness. The model of total beam stiffness is validated against computational results from finite element analyses of beam models. A case study demonstrates the use of the selection charts to compare the performance of beams at the conceptual design stage.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.112553 |
| Date | January 2007 |
| Creators | Amany, Aya Nicole Marie. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Engineering (Department of Mechanical Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 002711499, proquestno: AAIMR51443, Theses scanned by UMI/ProQuest. |
Page generated in 0.0019 seconds