Access to clean water is one of the world's foremost challenges that has been addressed on a large scale by membrane-based separation processes for the last six decades. Commercial membrane technology within one operation, reverse osmosis, has remained consistent since the late 1970s, however within the last two decades, access to nanotechnology has created a realm of study involving thin film nanocomposite (TFN) membranes, in which nanoparticles are incorporated into existing membrane designs. Desirable properties of the nanoparticles may positively impact qualities of the membrane like performance, anti-fouling behavior, and physical strength. In the present work, two types of nanoparticles have been evaluated for their potential as TFN additives: cellulose nanocrystals (CNCs) and metal-organic framework (MOF) nanorods. CNCs were chosen due to their high aspect ratios, mechanical strength, and potential for surface functionalization. MOF nanorods are also of interest given their aspect ratios and potential for functionalization, but they also possess defined pores, the sizes of which may be tuned with post-synthetic modification. Both CNCs and MOF nanorods were incorporated into TFN membranes via interfacial polymerization, and the resulting membranes were characterized using a variety of techniques to establish their performances, but also to gain insight into how the presence of each nanoparticle might be affecting the membrane active layer formation. A resulting CNC membrane (0.5 wt% loading) exhibited a 160% increase in water flux and an improvement in salt rejection to 98.98 ± 0.41 % compared to 97.53 ± 0.31 % for a plain polyamide control membrane. Likewise, a MOF nanorod membrane (0.01 wt% loading) with a high ratio of acid chain modification exhibited a 95% flux increase with maintained high salt rejection. For the CNCs, the flux increase is attributed to the formation of nanoscale voids along the length of each particle that form during the interfacial polymerization. These nanochannels introduce new rapid water transport pathways within the active layer of each membrane while maintaining ion rejection. The proposed mechanism for the MOF nanorods also introduces nanochannels into each membrane, but the presence of each nanorod's pore structure may offer another transport pathway for water molecules, one that varies with pore size. In combination, these results have allowed the study of molecular transport of water molecules and various ion species within the active layer of a thin film composite RO membrane. Understanding these phenomena will allow the development of smarter membrane materials to address present-day and future separations challenges.
Carbon nanotubes are also demonstrated as surface modifiers for forward osmosis (FO) membranes to address issues unique to the FO process, namely reverse solute flux (RSF). This method shows promise, as a coating density of 0.97 g/m2 reduced RSF for many draw solution species, including a 55% reduction for sodium chloride. / Doctor of Philosophy / Access to clean water is one of the world's foremost challenges that has been addressed on a large scale by membrane-based separation processes for the last six decades. Commercial membrane technology within one operation, reverse osmosis, has remained consistent since the late 1970s, however within the last two decades, access to nanotechnology has created a recent realm of study in which nanoparticles are incorporated into existing membrane designs. It is desired to use nanotechnology, or nanoparticles to improve membrane performance, i.e. create a membrane with better rejection of unwanted ions or contaminants or improve the amount of water that passes through the membrane. In the present work, two types of nanoparticles have been evaluated for their potential as TFN additives: cellulose nanocrystals (CNCs) and metal-organic framework (MOF) nanorods. Both CNCs and MOF nanorods were incorporated into membranes and the resulting membranes were characterized using a variety of techniques to establish how the nanoparticles affected performance. A resulting CNC membrane (0.5 wt% loading) exhibited a 160% increase in water flux (the amount of water passing through an area in a given amount of time) and an improvement in salt rejection. Likewise, a MOF nanorod membrane with a high ratio of acid chain modification exhibited a 95% flux increase with maintained high salt rejection. For both the CNCs and the MOFs, these performance changes are attributed to new pathways within each membrane for water flow that exist due to the presence of the nanoparticles in each system. In combination, these results have allowed the study of transport of water molecules and various ion species in each membrane. Understanding these results will allow the development of smarter membrane materials to address present-day and future separations challenges.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/97724 |
| Date | 16 April 2020 |
| Creators | Smith, Ethan D. |
| Contributors | Chemical Engineering, Martin, Stephen M., Foster, Earl Johan, Deshmukh, Sanket A., Ducker, William A. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf, application/pdf |
| Rights | Creative Commons Attribution-ShareAlike 4.0 International, http://creativecommons.org/licenses/by-sa/4.0/ |
Page generated in 0.0038 seconds