Published Article / Until recently solid freeform fabrication (SFF) technology has been used
mostly for production of prototype parts. However, as this technology matures,
the initiative of utilising it for the manufacture of end-use products is
establishing itself. As this tendency to use SFF for actual production runs
increases, a demand is developing for sets of process-specific design for
manufacture (DFM) guidelines that will assist designers who are designing
parts for manufacture by a specific rapid manufacturing (RM) process. The
purpose of this paper is to provideRMdesigners with such a series of processspecific
design for manufacture guidelines.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cut/oai:ir.cut.ac.za:11462/504 |
| Date | January 2008 |
| Creators | Gerber, G.F., Barnard, L.J. |
| Contributors | Central University of Technology, Free State, Bloemfontein |
| Publisher | Journal for New Generation Sciences, Vol 6, Issue 2: Central University of Technology, Free State, Bloemfontein |
| Source Sets | South African National ETD Portal |
| Language | en_US |
| Detected Language | English |
| Type | Article |
| Format | 87 906 bytes, 1 file, Application/PDF |
| Rights | Central University of Technology, Free State, Bloemfontein |
| Relation | Journal for New Generation Sciences;Vol 6, Issue 2 |
Page generated in 0.0023 seconds