Return to search

Implementation of a PCI based gigabit Ethernet network adapter on an FPGA together with a Linux device driver

<p>Here at ISY research is performed on network processors. In order to evaluate the processors there is a need to have full control of every aspect of the transmission. This is not the case if you use a proprietary technology. Therefore the need for a well documented gigabit Ethernet network interface has emerged. </p><p>The purpose of this thesis work has been to design and implement an open source gigabit Ethernet controller in a FPGA together with a device driver for the Linux operating system Implementation has been done in Verilog for the hardware part and the software was developed in C.</p><p>We have implemented a fully functional gigabit Ethernet interface onto a Xilinx Virtex II-1500 FPGA together with a Linux device driver. The design uses approximately 7200 LUTs and 48 block RAMs including the opencores PCI bridge.</p>

Identiferoai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-7818
Date January 2006
CreatorsKarlsson, Thomas, Lindgren, Svein-Erik
PublisherLinköping University, Department of Electrical Engineering, Linköping University, Department of Electrical Engineering, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, text

Page generated in 0.002 seconds