<p>Throughout recent years, legislations concerning emission levels for vehicles have become more restrictive and will be even more restrictive in the future. In the recent European environmental standards, EURO 4 (2006) and EURO 5 (2008), further requirements have been added on top of low emission demands. All heavy duty trucks have to be equipped with an OBD-system. Scania CV AB has today an existing OBD-system that consists of several tests. Typically, a test is designed to check if a signal is inside specified limits or thresholds. To improve the system, Scania CV AB and Vehicular Systems at Linköping University have developed a method to design diagnosis systems in an automatic way, implemented in a toolbox called DSAME.</p><p>In this thesis, an automatic designed OBD-system has been created with DSAME and the corresponding parts in a manually designed OBD-system have been identified. The two systems have been compared. The result shows that both systems are equally at detecting faults but the automatic designed OBD-system is a lot better to isolate the faults than the existing OBD-system.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-8029 |
| Date | January 2006 |
| Creators | Hansen, Joakim, Molin, Jens |
| Publisher | Linköping University, Department of Electrical Engineering, Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.0019 seconds